PRODUCT CENTER

Tie Bar

Tie bars have pins at each end which fit in holes of 2 and 3 board stage brackets (hop ups) to prevent the brackets spreading and the planks from becoming dislodged.

关键词:

隐藏域元素占位

Toe Board End Clip

A board on edge shall be fixed beneath the guardrail to form a toe board approximately 150mm above the deck level.

关键词:

隐藏域元素占位

Ladder Transom

The ladder transom is used to provide an opening for a ladder to pass through inside the scaffold, allowing for internal access. Clamps at 90 degrees to ledgers to allow 1.2 meter steel boards to sit in.

关键词:

隐藏域元素占位

Step-down Bracket

The first step onto a stair access or ladder access is always difficult due to site constraints, ground levels and base outs. The use of the adjustable step-down bracket gives the comfort of adjustment to balance the variables so the step becomes balanced when getting on or getting off a stair access at ground level.

关键词:

隐藏域元素占位

Ringlock System

Ring-Lock Scaffolding System consists of hot dipped galvanized steel pie and modular components that are assembled together using integral wedge connectors. Our Ring-Lock system is a modular scaffold system which can provide a major saving in labor cost while meeting the demands for safety, ease of handling and reductions in maintenance.

关键词:

隐藏域元素占位

Lattice Girder

Lattice girders are horizontal members of Ringlock scaffolding that allow for scaffolding over spans or gaps.

关键词:

隐藏域元素占位

Ringlock Side Bracket

Side/Hop-Up Brackets are used to extend the working platform closer to the building structure in cases where the main scaffold cannot be erected directly next to the working face.

关键词:

隐藏域元素占位

Scaffold Leg Locks

The Leg Lock, used in pairs, is designed to attach to the bottom rosette of the top Standard and to the top rosette of the bottom Standard.This joins the standards together in preparation for suspended or lifted scaffold applications.

关键词:

隐藏域元素占位

Intermediate Transom

The range of Intermediate Transom offered by us provides a secure mid-bay support for scaffold boards.This intermediate transom strongly holds the ledgers in their jaw segment and avoids the central bending of the platform boards.All these products are used with hop-up brackets. You can avail these products from us with the tube size of 48.3 x 3.25mm.

关键词:

隐藏域元素占位

Base Collars

The ring lock base collar is used with rosette and height-adjustable surface plated to build a scaffolding base.The initial section is placed in the base place, and then the vertical section is installed.

关键词:

隐藏域元素占位

Swivel Adapter Clamp

Right Angle adapter clamps are designed to easily join steel or aluminum tube directly to rosette of the ringlock scaffold creating 90 degree angles.It is designed to easily join a scaffold tube to the rosette of a Ringlock Scaffold, producing a variety of angles and configurations.

关键词:

隐藏域元素占位

Board Bracket

This Ringlock Board bracket is integrated into the rosette segment for positioning scaffold boards and is attached to the rosette joint so that the brackets are accurately placed. These ringlock board brackets are used in conjunction with steel scaffold plank and appropriate safety guard rails which accept ledger horizontals.They allow you to work closer to your structure.

关键词:

隐藏域元素占位

< 1...101112...14 >